Sona Comstar is the brand name of Sona BLW Precision Forgings Limited, a Gurugram-based maker of precision-forged differential gears, differential assemblies, EV traction motors, motor control units and starter motors for global carmakers, EV makers and commercial vehicle companies. Since 2025 it has also become a railway equipment supplier after taking over the Railway Equipment Division of Escorts Kubota. Sona Comstar jobs attract ITI machinists and forging operators, diploma and B.Tech mechanical and electrical engineers, and software and electronics engineers who want to work in EV technology.
Jobs may be available at its plants and offices in Gurugram and Manesar (Haryana), Chakan near Pune (Maharashtra) and Chennai (Tamil Nadu), where it runs motor manufacturing and an EV R&D centre, and at the railway equipment facility in Faridabad (Haryana). The company also has plants and engineering centres outside India in the USA, Mexico, Serbia and China.
Hiring normally takes place through the careers section of the official website, campus placements at engineering colleges and ITIs, the national apprenticeship portal and authorised agencies for some roles. Vacancies change from time to time. This article is an independent guide and not the official website of Sona Comstar or Sona BLW Precision Forgings Limited.
Sona Comstar Careers 2026 – Quick Overview
| Detail | Information |
|---|---|
| Company | Sona BLW Precision Forgings Limited (Sona Comstar) |
| Industry | Automotive driveline, EV traction motors, precision forging, railway equipment |
| Headquarters | Sector 35, Gurugram, Haryana |
| Key Locations in India | Gurugram and Manesar (Haryana), Chakan, Pune (Maharashtra), Chennai (Tamil Nadu), Faridabad railway division (Haryana) |
| Job Types | Forging and CNC operators, gear and assembly lines, motor assembly, quality, R&D and software, railway equipment assembly and testing |
| Fresher Salary (Indicative) | ₹12,000 – ₹40,000 per month |
| Experienced Salary (Indicative) | ₹30,000 – ₹1,40,000 per month |
| Minimum Education | ITI, diploma, B.Tech/B.E., M.Tech, graduate or MBA |
| Experience | Freshers and experienced professionals |
| Training Programs | Apprenticeship (NAPS/NATS), Graduate and Diploma Engineer Trainee hiring, on-the-job training |
| Work Type | Full-time plant, R&D and corporate roles; shift work in plants |
| Official Hiring Channel | Careers section of sonacomstar.com, campus drives, apprenticeshipindia.gov.in |
| Selection Process | Application, shortlisting, test, technical and HR interviews, medical, documents |
About Sona Comstar in India
Sona Comstar was founded in 1995 and started making differential gears in Gurugram in 1999 and in Pune in 2005. In April 2026 it announced that it had produced 500 million differential gears and 10 million differential assemblies, and it estimates its global market share in differential gears at about 8.7% in CY25. It opened new plants at Chakan in 2023 and Manesar in 2024, and has an EV-focused R&D centre in Chennai. Its shares are listed on BSE and NSE.
A key development for jobs is diversification. In June 2025 Sona Comstar completed the purchase of the Railway Equipment Division of Escorts Kubota through a slump sale. This Faridabad-based business makes brakes, couplers, suspension and rubber components for Indian Railways and reported FY25 revenue of about ₹913 crore. The company also took a majority stake in Serbia-based Novelic in 2024, adding radar and sensing software skills, which may lead to more electronics and software roles.
Types of Jobs at Sona Comstar
Forging Operator
Forging operators run hot and warm forging presses that shape steel into gear blanks, a core process for precision-forged bevel gears.
CNC / VMC Operator
CNC and VMC operators machine forged gears and housings to tight tolerances and check parts with gauges.
Differential Assembly Operator
These operators assemble complete differential units on assembly lines and carry out end-of-line testing.
Motor Assembly and Testing
Staff in motor plants assemble and test starter motors, EV traction motors and motor control units.
Railway Equipment Technician
Technicians in the railway division assemble and test brake systems, couplers and suspension parts for Indian Railways and coach builders.
Quality Engineer
Quality engineers manage inspection, metrology, heat treatment checks and customer quality for global OEMs.
R&D, Motor Design and Software Engineer
Engineers in R&D work on electric motor design, power electronics, embedded software and sensing technologies.
Heat Treatment and Metallurgy
Metallurgy staff control carburising and heat treatment processes that give gears the required strength.
Sona Comstar Salary 2026
| Position | Indicative Monthly Salary (₹) |
|---|---|
| ITI Apprentice | ₹12,000 – ₹15,500 |
| Forging Operator | ₹16,000 – ₹24,000 |
| CNC / VMC Operator | ₹17,000 – ₹26,000 |
| Diploma Engineer Trainee | ₹20,000 – ₹26,000 |
| Graduate Engineer Trainee | ₹28,000 – ₹40,000 |
| Quality Engineer | ₹30,000 – ₹48,000 |
| Motor Design / Software Engineer | ₹45,000 – ₹90,000 |
| Manager | ₹80,000 – ₹1,40,000 |
These are indicative ranges based on public salary reports and stipend norms, and real pay may vary with plant, skill level and experience. Only the official offer letter confirms your actual salary.
Sona Comstar Freshers Jobs
ITI freshers in Machinist, Turner, Fitter, Forger and Heat Treater or Electrician trades may join Sona Comstar as apprentices or trainee operators in its forging, machining and assembly plants in Gurugram, Manesar and Pune. These roles teach precision manufacturing skills that are valued across the auto industry.
Diploma holders may enter as Diploma Engineer Trainees in production, maintenance and quality, while B.Tech graduates in mechanical, production, metallurgy and electrical engineering may be hired as Graduate Engineer Trainees through campus drives.
Freshers with electrical, electronics or computer science degrees may find entry roles in EV motor, power electronics and software teams, especially around the Chennai R&D centre and Gurugram. The railway division in Faridabad may also hire freshers for assembly and testing work.
Sona Comstar Training Programs
Sona Comstar builds skills mainly through apprenticeship, trainee hiring and structured on-the-job training.
Apprenticeship (NAPS/NATS)
The company’s plants engage ITI, diploma and graduate apprentices under government schemes, with stipends as per the rules in force.
Graduate Engineer Trainee (GET)
Engineering graduates may join as GETs and rotate through forging, machining, assembly and quality before a final posting.
Diploma Engineer Trainee (DET)
Diploma holders may join as DETs and learn shop-floor supervision, machine setting and maintenance.
On-the-Job Skill Training
New operators typically learn machine operation, measuring instruments and safety rules from trainers and senior operators before working independently.
Eligibility
- Minimum age of 18 years for plant and apprentice positions.
- Required qualification as per the role: ITI, diploma, B.Tech, M.Tech or MBA.
- Good knowledge of technical basics for engineering roles.
- Physical fitness for forging and machining shop work.
- Willingness to work in rotating shifts and relocate if needed.
- Apprentices should not have completed an apprenticeship in the same trade before.
Education Qualification
Education requirements depend on the department:
- ITI in Machinist, Turner, Fitter, Forger and Heat Treater, Electrician or Electronics Mechanic.
- Diploma in Mechanical, Production, Automobile, Electrical or Metallurgy.
- B.Tech/B.E. in Mechanical, Production, Metallurgy, Electrical, Electronics or Computer Science.
- M.Tech in Electrical Machines, Power Electronics or Mechanical Design for some R&D roles.
- B.Com, BBA or MBA for finance, HR, supply chain and business roles.
Selection Process
- Check vacancies on the official careers page or campus notice board.
- Apply online or through your placement cell with your resume.
- Shortlisting based on qualification, marks and relevant skills.
- Aptitude and technical test for trainee engineer roles.
- Practical or trade test for operator roles, where used.
- Technical interview with plant or R&D managers.
- HR interview on salary, location and joining.
- Medical examination and document verification.
Working Hours and Shifts
- Plants commonly run in three 8-hour shifts.
- Forging and machining lines may operate round the clock.
- R&D and corporate staff usually follow general day shifts.
- Overtime is paid as per policy and labour law where applicable.
Shift patterns vary by plant, line and customer demand.
Benefits
- Provident Fund (PF) as per law.
- ESIC for employees within the eligible wage limit.
- Gratuity after the qualifying service period.
- Group medical insurance for permanent staff, as per policy.
- Canteen and transport facilities at many plants.
- Statutory bonus and performance-linked pay where applicable.
- Earned and casual leave plus holidays.
- Safety shoes, uniforms and protective equipment.
Actual benefits depend on the role, grade, location and type of employment.
Career Growth
ITI Apprentice → CNC Operator → Setter / Senior Operator → Supervisor → Production Engineer
- Operators may grow into machine setters and line leaders.
- GETs and DETs may move up to engineer, section head and manager roles.
- EV and motor programs may offer specialist growth in design and electronics.
- The railway business may open new career tracks in rail systems.
- Global plants may give experienced staff exposure to international operations.
Skills That Can Improve Your Chances
- CNC programming and machine setting (Fanuc, Siemens controls).
- Knowledge of forging, gear manufacturing and heat treatment.
- Use of measuring instruments, CMM and gear inspection basics.
- Understanding of GD&T and engineering drawings.
- Electric motor and power electronics basics for EV roles.
- Embedded C, MATLAB/Simulink or Python for software and controls roles.
- Quality tools like FMEA, SPC and 8D problem solving.
- Lean manufacturing and TPM awareness.
- Good communication and teamwork.
Documents Required
- Aadhaar card
- PAN card
- 10th and 12th marksheets
- ITI, diploma, degree or postgraduate certificates
- Updated resume
- Passport-size photographs
- Bank account details
- Experience and relieving letters, if applicable
- Apprenticeship registration details, where relevant
Keep originals and self-attested copies ready for document verification.
How to Apply Online
Step 1
Visit the official Sona Comstar website (sonacomstar.com) and open the careers section.
Step 2
Filter jobs by location, such as Gurugram, Manesar, Pune, Chennai or Faridabad, and by function.
Step 3
Create a profile and upload your CV with accurate details.
Step 4
For apprenticeships, register on apprenticeshipindia.gov.in and look for Sona BLW Precision Forgings listings.
Step 5
Track campus and off-campus drives through your college or ITI placement office.
Step 6
Attend tests and interviews when shortlisted.
Step 7
Complete document verification and medical checks.
Step 8
Accept the offer letter and report for induction on the joining date.
Beware of Fake Job Offers
Well-known listed companies are often used in fake job messages. Keep yourself safe:
- Genuine companies never ask for money for jobs, training or offer letters.
- Check that emails come from the official company domain.
- Do not share OTPs, bank logins or card numbers.
- Apply only through official websites, campus drives or government portals.
- Report suspicious offers at cybercrime.gov.in or call 1930.
Sona Comstar Careers 2026 – FAQs
What is the fresher salary at Sona Comstar?
Freshers may typically earn around ₹16,000 – ₹40,000 per month depending on whether they join as operators, DETs or GETs. These figures are indicative.
What does Sona Comstar make?
It makes differential gears and assemblies, EV traction motors, motor controllers and starter motors, and, since 2025, railway brakes, couplers and suspension systems.
Who is eligible for Sona Comstar jobs?
ITI, diploma, B.Tech, M.Tech, graduate and MBA candidates can apply for roles matching their qualifications.
Does Sona Comstar hire apprentices?
Yes, its plants commonly engage apprentices. Check apprenticeshipindia.gov.in for current openings.
Does Sona Comstar hire for railway jobs?
After acquiring Escorts Kubota’s Railway Equipment Division in Faridabad, the company may hire for railway product assembly, testing and engineering roles.
How can I apply to Sona Comstar?
Apply through the careers section of sonacomstar.com, campus drives or the apprenticeship portal.
Is any fee charged for Sona Comstar jobs?
No. Genuine hiring never charges a fee. Avoid anyone asking for payment.
Are there EV jobs at Sona Comstar?
Yes, the company focuses heavily on EV driveline and motors, so openings may come up in motor design, electronics and software.
Final Words
Sona Comstar combines precision forging, EV motor technology and a new railway equipment business, which gives job seekers many possible career paths. Candidates with strong machining, electrical or software skills may find rewarding long-term opportunities here.
Disclaimer: Salary figures are indicative and may differ from actual offers. This is an independent informational guide and is not affiliated with Sona Comstar or Sona BLW Precision Forgings Limited. No job or salary is guaranteed. Always verify openings on the official careers portal, and never pay any fee to anyone for a job.
Tags
Forging Operator Salary ₹19000
CNC Operator Salary ₹21000
Diploma Engineer Trainee Salary ₹23000
Graduate Engineer Trainee Salary ₹34000
Software Engineer Salary ₹60000